ROTARY PREMIX BOTTLES
Marked from 25ml to 225ml with notches every 25 ml and marked 1 ounce to 8 ounces with notches for 1/2 ounce increments.
The 225ml bottles are compact that you can easily fit 4 of them in your glove box or bins. Now you can ditch the premix oil container into 4 of these and have an accurate ratio depending on your application, down to a 25ml.
These lids are lined with a liner that will provide a good seal between the cap & bottle which if fitted correctly it will not leak. However, if the lid is over tightened, the lining can bind up and wrinkle, causing it to not properly seal. When putting on the cap, simply use 2 fingers to tighten the cap.
Bottle Dimensions: H= 58mm x D=50
Bottles are made of High density polyethylene (HDPE)
Lids are made of polypropylene (PP) with a liner that seals and stays tight for no residual leaking, during testing,
DO NOT PUT GASOLINE OR ANY FUELS INTO THIS CONTAINER. TESTED and APPROVED FOR PREMIX AND MOTOR OIL'S ONLY.
Caps may vary.